Step 2: Enter user name and password as below (Case sensitive)
User: Cisco
Password: Cisco
Step 3: Enter command line as below to reset the device to factory default.
clear lwapp private-config
Our Blog
Cisco access point air-lap1142n-a-k9 factory reset
Step 2: Enter user name and password as below (Case sensitive)
User: Cisco
Password: Cisco
Step 3: Enter command line as below to reset the device to factory default.
clear lwapp private-config
Subscribe to:
Post Comments (Atom)
Popular Posts
-
Step 1: Click here to learn serial connection using console cable Step 2: Use following parameters in putty and click Open ... -
Step 1: Click here to learn serial connection using console cable Step 2: Use following parameters in putty and click Open ... -
Step 1: Click here to learn serial connection using console cable Establish serial connection with switch using 9-Pin DB9 Serial RS23... -
step 1: Reboot the phone step 2: Press the * button to program when it prompts as the phone is starting up. step 3: when it ask f... -
Step 1: Establish a console connection to the switch using a Cisco serial cable to your pc or laptop. Step 2: Download and insta... -
Step 1: Connect IP phone to PoE switch to Power it on. Step 2: While booting press “ application button ” which is blue look like ... -
Step 1: TURN ON IP PHONE Step 2: PRESS AND HOLD " 4, 6, 8, and * " KEYS TOGETHER WHILE BOOTING Step 3: IT WILL ASK YOU... -
Step 1: Use PoE switch to power on Cisco access point (P/N: air-lap1142n-a-k9) Step 2: Enter user name and password as below (Case sensi... -
Step 1: Click here to learn serial connection using console cable Step 2: Use following parameters in putty and click Open ... -
*** To Hard Reset the Phone *** Step 1: Connect IP phone to PoE switch to turn it on. Step 2: Press and hold # button until speed dial...
Trying to reset AIR-AP1042N-E-K9
ReplyDeleteI have tried capwap private-config and lwapp private-config, non of them worked.
Then what?